Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Honda Fit

Step-by-Step Programming Instructions:

1. Entering the programming mode cancels all learned keyless remotes, rendering previously programmed remotes inactive. You need to reprogram all keyless remotes once in programming mode.
2. Each step must be completed within 5 seconds of the previous step to prevent exiting the programming mode.
3. Note: A maximum of 3 remote transmitters can be programmed. Ensure all doors are UNLOCKED before starting the programming procedure.

Programming Steps:

1. Turn the ignition switch to ON (II).
2. Press the LOCK or UNLOCK button on one of the remotes (an unprogrammed remote can be used for this step).
3. Turn the ignition switch to ACCESSORY (I) or LOCK (O).
4. Turn the ignition switch to ON (II).
5. Press the LOCK or UNLOCK button on one of the remotes.
6. Turn the ignition switch to ACCESSORY (I) or LOCK (O).
7. Turn the ignition switch to ON (II).
8. Press the LOCK or UNLOCK button on one of the remotes.
9. Turn the ignition switch to ACCESSORY (I) or LOCK (O).
10. Turn the ignition switch to ON (II).
11. Press the LOCK or UNLOCK button on the same remote. Ensure the power door locks cycle to confirm you are in programming mode.
12. Press the LOCK or UNLOCK button on each remote you want to program. Ensure the door locks cycle after you push each remote button to confirm the system has accepted the remote.
13. Turn the ignition switch to LOCK (O) to exit programming mode.
14. Test the remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Honda Fit