Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Toyota RAV4

Step-by-Step Programming Instructions:

1. Enter the vehicle and ensure all doors are closed.
2. Insert the master Toyota key into the ignition cylinder and then remove it. Repeat this process four times.
3. On the fifth insertion, leave the master key in the ignition cylinder.
4. Open and close the driver’s side door six times.
5. Remove the master key from the ignition cylinder.
6. Verify that the security light on the information display is solid, indicating that the car has successfully entered programming mode.
7. Insert the new transponder chip key.
8. Observe the security light blinking for approximately 60 seconds.
9. Once the security light goes out, your new key should be successfully programmed.
10. Remove the new key from the ignition cylinder.
11. To confirm that your new key can deactivate the anti-theft system, check if the security indicator light on the information display disappears when inserting the properly programmed key into the ignition cylinder.
12. If programming is unsuccessful, restart the process from step 1.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Toyota RAV4