Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Mazda 5

Step-by-Step Programming Instructions:

**Remote Programming:**
1. Begin by getting into the vehicle and ensuring all doors are closed. Then, open the driver’s door and leave it open.
2. Within 24 seconds, insert the key into the ignition and turn the ignition switch to ON and then OFF three times. Leave the key in the ignition. Next, close and open the driver’s door three times.
3. If done correctly, the doors will automatically lock and then unlock, indicating that the vehicle is in programming mode. If the locks do not cycle, restart the procedure.
4. Press the unlock button twice on the first remote to be programmed. The door locks will cycle automatically to indicate successful programming. If there is only one remote, press any button twice again on the same remote. If there are two remotes, press any button on the second remote twice, then press any button twice again on the second remote. To program three remotes, press any button twice on the second remote, wait for the locks to cycle, then press any button twice on the third remote.
5. Programming is complete. Close the door and test the remotes to ensure proper programming.

**Key Programming:**
1. Insert a programmed (working) key into the ignition cylinder.
2. Turn the ignition cylinder ON (without cranking the engine) and then back to OFF. The ignition should stay in the ON position for approximately 3 seconds until the security light goes out.
3. Turn to the OFF position and remove the existing key.
4. Within 10 seconds, insert a second programmed (working) key and turn to ON and then back to OFF. The ignition must be on for at least 3 seconds until the security light goes out.
5. Turn to the OFF position and remove the existing key.
6. Insert the new (unprogrammed) key before twenty seconds have elapsed and turn to ON. Leave it in the ON position for at least 3 seconds and then turn back to OFF.
7. The security light will illuminate for three seconds to indicate that the new key has been successfully programmed.

For those without two original keys, they will need to be programmed by a locksmith.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Mazda 5