Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Isuzu i350

Step-by-Step Programming Instructions:

1. Ensure all remotes, including working ones, are available.
2. Close all doors.
3. Insert the key into the ignition.
4. Press and hold the power UNLOCK button on the driver’s side door panel. Do not release until instructed in step 5.
5. Quickly turn the ignition ON, OFF, ON, OFF. (ON is just before starting your vehicle, OFF allows key removal)
6. Release the power unlock button on the driver’s side door panel. The vehicle should respond by automatically locking and unlocking. If the locks cycle, proceed to step 7. If the locks cycle before releasing the unlock button, the vehicle hasn’t entered programming mode; start over from step 1. If the vehicle continues to cycle locks before releasing the unlock button, there’s a system problem, and remotes must be programmed by a professional. If locks fail to cycle, adjust key turning speed, check vehicle system, or verify if the vehicle has a factory keyless entry system.
7. Simultaneously hold the LOCK and UNLOCK buttons on the remote until the door locks cycle again. This may take up to 30 seconds.
8. Repeat step 7 for all additional remotes, including working ones.
9. After programming all remotes, turn the ignition to ON to exit programming mode.
10. Turn the ignition to OFF, remove the key, and test all remotes.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Isuzu i350