How to Program a 2006 Honda Accord Ignition Smart Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Honda Accord

Step-by-Step Programming Instructions:

Note: Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work. You must reprogram all of the keyless remotes once you are in the programming mode. You must complete each step within 5 seconds of the previous step to keep the system from exiting the programming mode.

1. Turn the ignition switch to ON (II).
2. Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
3. Turn the ignition switch to LOCK (0).
4. Repeat steps 1, 2, and 3 two more times using the same keyless remote used in step 2.
5. Turn the ignition switch to ON (II).
6. Press the LOCK or UNLOCK button on the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
7. Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm the system has accepted the remote.
8. Turn the ignition switch to LOCK (0) to exit programming mode.
9. Test remote(s). If you have a Remote Head Key, you can use the instructions above to program the remote portion of the key, but to cut and program the key portion, you will need a locksmith.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Honda Accord