How to Program a 2006 Dodge Charger Ignition Smart Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Dodge Charger

Step-by-Step Programming Instructions:

**Please note:** This procedure is applicable only to vehicles manufactured in the USA. You must possess two functioning programmed remotes/keys before attempting to add a third remote/key. If you only have one working remote/key and wish to add a second key, this procedure will not be effective.

1. Utilize the first programmed remote/key to turn the ignition to the ON position for 5 seconds (Do not crank the engine). Turn the remote/key off and remove it.

2. Within 5 seconds, insert the second working programmed remote/key. Turn the ignition to the ON position (Do not crank the engine). The security light will start flashing, and a chime will be audible within 10 seconds. Turn the remote/key off and remove it. **Note:** In some vehicles, there might not be a chime; only the security light will flash.

3. Within 5 seconds of the previous step, insert the third new cut remote/key and turn the ignition to the ON position (Do not crank the engine). The security light should commence flashing, and within 10 seconds, you should hear a chime, and the security light should extinguish. Once the security light goes out, the new remote/key should be programmed. Turn the remote/key to the OFF position and remove it.

4. Test the key and remote to ensure proper functionality.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2006 Dodge Charger