Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Nissan Murano

Step-by-Step Programming Instructions:

If you have a separate key and remote, follow the procedure below. If you have a Remote Key Combo (remote in the head of your key), this procedure will only program the remote portion or the Remote Key Combo. IMPORTANT: Before entering programming mode, ensure you have all the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program them again.

1. Close and lock all doors with the driver’s side power lock/unlock switch.
2. Insert the key into the ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw the key completely from the ignition cylinder each time. If this procedure is performed too fast, the system will not enter programming mode.
3. Insert the key into the ignition cylinder and turn it to the ACC position.
4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful.
5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters).
6. Turn the key to the OFF position, remove the keys from the ignition. Then unlock doors using the driver’s side power lock/unlock and open the driver’s side door.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Nissan Murano