How to Program a 2005 Mitsubishi Endeavor Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Mitsubishi Endeavor

Step-by-Step Programming Instructions:

1. Locate the Data Port.
2. Insert keys in the ignition and leave them in the OFF position.
3. Ensure there are metal contact pins in terminals 1 and 4 and connect the Data Port with a suitable jumper wire. Keep the jumper wire connected throughout the programming procedure. Make sure you know which terminals are 1 and 4.
4. Within 10 seconds after connecting the jumper wire, press the Hazard Switch 6 times. Note: The doors will automatically lock and unlock once at this time, indicating that the system is in the programming mode.
5. Press the LOCK button on the remote to be registered three times within 10 seconds. Upon successful programming, the door will lock and unlock once.
6. Repeat step 5 with up to 4 remotes (including any existing remotes) within one minute. After completing each programming, the doors will lock and unlock once.
7. Disconnect the programming wire and remove the keys from the ignition.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Mitsubishi Endeavor