Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Dodge Neon

Step-by-Step Programming Instructions:

Note: To add a new key, you need two valid keys. If you lack two working keys, a locksmith must program a key for you. Follow these steps:

1. Insert the first valid key into the ignition switch. Turn the ignition to the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, switch to the LOCK position and remove the first key.

2. Insert the second valid key into the ignition switch. Turn the ignition to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound, and the Vehicle Security Light will start flashing. Turn the ignition to the LOCK position and remove the second key.

3. Insert the new key into the ignition switch within 60 seconds. After 10 seconds, a single chime will sound, and the Vehicle Security Light will stop flashing. Programming is complete when the Vehicle Security Light briefly turns on before turning off. The new key is now programmed. Repeat this procedure to program up to eight keys.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Dodge Neon