404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2005 Chevrolet Suburban Keyless Entry Remote Key Fob - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2005 Chevrolet Suburban Keyless Entry Remote Key Fob

0
26

Compare
SKU: Remote Chevrolet Suburban 2005 Categories: , , , Tags: , , ,

Description

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Chevrolet Suburban

Step-by-Step Programming Instructions:

1. Shut all doors.
2. Insert the key into the ignition.
3. Press and hold the power UNLOCK button on the driver’s door panel. Keep holding until instructed to release in step 9.
4. Perform steps 5 through 8 in rapid succession.
5. Turn the ignition to the ON position (without starting the engine).
6. Turn the ignition to the OFF position.
7. Turn the ignition to the ON position again (without starting the engine).
8. Turn the ignition to the OFF position.
9. Release the power UNLOCK button on the door panel. The vehicle should respond by automatically locking and unlocking the door locks. If the locks do not cycle after releasing the button, the vehicle has not entered programming mode. Restart the procedure by removing the key from the ignition, opening the driver’s door, and returning to step 1.
10. Hold down the LOCK and UNLOCK buttons on the remote until the doors lock and unlock. This may take up to 30 seconds.
11. Repeat step 10 for each additional remote (including any existing remotes).
12. Turn the ignition to the ON position to exit the programming mode.
13. Test the remote(s).

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Chevrolet Suburban

Leave a reply

X
X