Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Cadillac XLR

Step-by-Step Programming Instructions:

Programming with a Recognized Transmitter:

1. Ensure the vehicle is turned off.
2. Carry both the recognized and new, unrecognized transmitters with you.
3. Move to the rear of the vehicle and insert the vehicle key into the key cylinder located on the lower rear fascia on the driver’s side.
4. Open the trunk and turn the key five times within five seconds.
5. The Driver’s Information Center (DIC) will display “READY FOR FOB #X,” where X can be 2, 3, or 4.
6. Place the new, unrecognized transmitter in the glove box transmitter pocket with the buttons facing to the right.
7. Once the transmitter is programmed, a beep will sound. The DIC will display “READY FOR #X,” where X can be 3 or 4, or “MAX # FOBS LEARNED.”
8. Press the OFF/ACCESSORY button.

Programming without a Recognized Transmitter:

1. Ensure the vehicle is turned off.
2. Place the new, unrecognized transmitter in the glove box transmitter pocket with the buttons facing to the right.
3. Move to the rear of the vehicle and insert the vehicle key into the key cylinder located on the lower rear fascia on the driver’s side.
4. Open the trunk and turn the key five times within five seconds.
5. The DIC message will display “OFF-ACCTO LEARN.”
6. Press the OFF/ACCESSORY button.
7. The DIC will read “WAIT 10 MINUTES” and count down to zero, one minute at a time.
8. The DIC will display “OFF-ACCTO LEARN” again.
9. Press the OFF/ACCESSORY button.
10. The DIC will read “WAIT 10 MINUTES” and count down to zero, one minute at a time.
11. Repeat steps 8-10 two more times.
12. A beep will sound, and the DIC will read “READY FOR FOB #1.” At this time, all previously known transmitters have been erased.
13. Once the transmitter is recognized and programmed, a beep will sound, and the DIC will display “READY FOR FOB #2.”
14. If you have additional transmitters to program, repeat the process with each transmitter. You can do this repeatedly until up to four transmitters have been programmed.
15. The DIC will then display “MAX # FOBS LEARNED” and exit the programming mode. When you are done programming transmitters, press the OFF/ACCESSORY button.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Cadillac XLR