Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Cadillac STS

Step-by-Step Programming Instructions:

Programming with Recognized Transmitter: To synchronize a new transmitter with your vehicle when you already have a recognized transmitter, follow these steps. Canadian owners require two recognized transmitters:

1. Ensure the vehicle is turned off.
2. Have both the recognized transmitter and the new, unrecognized transmitter(s) with you.
3. Insert the vehicle key into the key lock cylinder located on the outside of the driver’s door.
4. Turn the key to the unlock position five times within five seconds.
5. The DIC will display READY FOR FOB #X, where X can be 2, 3, or 4.
6. Place the new, unrecognized transmitter into the transmitter pocket with the transmitter buttons facing the front of the vehicle. The transmitter pocket is inside the console bin located between the driver and front passenger seat.
7. Once the transmitter is programmed, a beep will sound. The DIC will display READY FOR #X, where X can be 3, 4, or MAX # FOBS LEARNED.
8. Remove the transmitter from the transmitter pocket and press the unlock button on the keyless access transmitter two times.

Programming without Recognized Transmitter: Canadian owners under the immobilizer standard must visit their GM dealer for transmitter matching if a recognized transmitter is unavailable. United States owners can match a new transmitter themselves if no recognized transmitter is available. The process requires three ten-minute cycles:

1. Ensure the vehicle is turned off.
2. Place the new, unrecognized transmitter into the transmitter pocket with the transmitter buttons facing the front of the vehicle.
3. Insert the vehicle key into the key lock cylinder located on the driver’s door.
4. Turn the key to the unlock position five times within five seconds.
5. The DIC message will display OFF-ACCESSORY TO LEARN.
6. Press the OFF/ACC button (ignition switch).
7. The DIC will read WAIT 10 MINUTES and count down to zero, one minute at a time.
8. The DIC will display OFF-ACCESSORY TO LEARN again.
9. Press the OFF/ACC button (ignition switch).
10. Repeat steps 7 and 8 two more times.
11. A beep will sound, and the DIC will read READY FOR FOB #1, erasing all previously known transmitters.
12. Once the transmitter is recognized and programmed, a beep will sound, and the DIC will display READY FOR FOB #2.
13. Remove the keyless access transmitter and press the unlock button twice to initialize it.
14. If you have more transmitters to program, repeat the process until four transmitters have been programmed. The DIC will then display MAX # FOBS LEARNED and exit the programming mode.
15. After programming, press the unlock button on each keyless access transmitter twice. Previously programmed transmitters will no longer function and must be reprogrammed.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Cadillac STS