Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Cadillac Escalade

Step-by-Step Programming Instructions:

1. Close all doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel, continuing to hold until instructed to release in step 9.
4. Perform steps 5 through 8 fairly rapidly.
5. Turn the ignition to the ON position (as far as possible without starting the engine).
6. Turn the ignition to the OFF position.
7. Turn the ignition to the ON position (as far as possible without starting the engine).
8. Turn the ignition to the OFF position.
9. Release the power UNLOCK button on the door panel. The vehicle should respond by door locks locking and unlocking automatically. (If locks do not cycle after releasing the unlock button, then the vehicle has not entered programming mode, and you must start the procedure over. Remove key from ignition, open driver’s door, and return to step 1). If the locks do cycle automatically, proceed to step 10.
10. Hold down the LOCK and UNLOCK buttons on the remote until the doors lock and unlock. This may take up to 30 seconds.
11. Repeat step 10 for each additional remote (including any existing remotes).
12. Turn the ignition to the ON position to exit the programming mode.
13. Test remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Cadillac Escalade