Description
to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2004 Mitsubishi Diamante
Step-by-Step Programming Instructions:
This vehicle necessitates two working programmed keys to add a new key to the system. Follow these steps:
1. Obtain a new key cut by a Locksmith or qualified individual.
2. Insert the first programmed key into the ignition and turn it to the ON position for 5 seconds, then back to the OFF position, and remove the key.
3. Insert the second programmed key into the ignition and turn it to the ON position until the immobilizer light starts flashing (within 10 seconds). Then, turn the ignition back to the OFF position and remove the key. Note: If an error occurs while the immobilizer light is flashing, it will go out; otherwise, it should continue flashing.
4. Within 30 seconds of the flashing immobilizer light, insert the new key into the ignition and turn it to the ON position. The immobilizer indicator light should stay solid for about 3 seconds when programming is complete. Turn the key back to the OFF position and remove it. Note: If an error occurs, the immobilizer indicator light will flash 3 times. In that case, start over from the beginning.
5. The new key should now start the vehicle.
6. To program additional keys, repeat steps 1 through 5 for each additional key.
If you have only one or no keys for this vehicle, it is not on-board programmable and requires a qualified professional to program the ignition key:
1. Locate an automotive locksmith in your area by visiting LocateALocksmith.com.
2. If your vehicle is still mobile, consider driving to the locksmith to save money instead of having them come to you.
3. The locksmith will then connect specialized computer equipment to your vehicle to program the ignition transponder chip key.
to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2004 Mitsubishi Diamante