Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2004 Mazda Miata

Step-by-Step Programming Instructions:

1. Remove the key from the ignition.
2. Close all doors.
3. Open the driver’s side door and leave it open.
4. Perform the following steps within 24 seconds:
a. Insert the key in the ignition.
b. Turn the key to ON and then OFF.
c. Repeat step b two more times.
d. Remove the key.
e. Push the black rubber button located on the driver’s door frame three times. This button informs the vehicle whether the door is closed or not.
5. A buzzing sound, chime, or the doors locking and unlocking should be heard at this point, signaling that the vehicle is now in programming mode. If not, wait 40 seconds and return to step 4.
6. All transmitters need to be programmed at this time, including the old ones. Press any button on the transmitter two times. A buzzing sound, chime, or the doors locking and unlocking should be heard at this point, signaling that the vehicle has accepted the new transmitter code. If there is only one transmitter, repeat this step two more times using the only transmitter. If there are two transmitters, repeat this step two more times using the second transmitter.
7. Push the driver’s door frame button one time. Two buzz sounds, chimes, or the doors locking and unlocking two times should be heard at this point, signaling successful programming.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2004 Mazda Miata