Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2004 Isuzu Axiom

Step-by-Step Programming Instructions:

1. Begin by opening the driver’s door and inserting the key into the ignition.
2. Turn the ignition switch to the ACC position, and then to the LOCK position three times swiftly. Make sure to complete this step within 3 seconds, as timing is crucial for entering the programming mode.
3. Within 10 seconds, close and open the door two times.
4. Repeat step 2: Turn the ignition switch to the ACC position, and then to the LOCK position three times within 3 seconds.
5. Again, within 10 seconds, close and open the door.
6. Confirm that the power door locks cycle once to indicate that the system is in programming mode.
7. Within 20 seconds, press the LOCK button on the transmitter you’re programming.
8. Confirm that the door locks cycle once.
9. Within 20 seconds, press the UNLOCK button on the transmitter.
10. Confirm that the door locks cycle once to indicate acceptance of the transmitter’s code.
11. Repeat steps 7 and 8 for each transmitter to be added.
12. Finally, remove the key from the ignition.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2004 Isuzu Axiom