How to Program a 2004 Dodge Durango Ignition Chip Key Transponder

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2004 Dodge Durango

Step-by-Step Programming Instructions:

Important Note: To add a new key to the system, you must possess two valid keys. If you lack two functioning keys, you will need a locksmith to program one for you. Follow these steps carefully:

1. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position for a minimum of three seconds, ensuring it does not exceed 15 seconds. Then, switch the ignition off to the LOCK position and remove the first key.

2. Insert the second valid key into the ignition switch. Within 15 seconds, turn the ignition switch to the ON/RUN position. After 10 seconds, you will hear a chime, and the Vehicle Security Light will start flashing. Switch the ignition to the LOCK position and remove the second key.

3. Insert the new key into the ignition switch within 60 seconds. After 10 seconds, a single chime will sound, and the Vehicle Security Light will stop flashing. To confirm programming completion, the Vehicle Security Light will briefly turn on before turning off. Your new key is now programmed. This procedure also programs the Remote Keyless Entry transmitter. Repeat these steps to program up to eight keys.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2004 Dodge Durango