How to Program a 2003 Nissan Murano Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Nissan Murano

Step-by-Step Programming Instructions:

Before entering programming mode, ensure you have all the transmitters you will use on the vehicle. Once programmed, all previous codes will be erased. Other transmitters won’t work until programmed again.

1. Close and lock all doors using the driver’s side power lock/unlock switch.
2. Insert the key into the ignition and remove it at least six times within 10 seconds. Successful completion will result in your Hazard Lamps flashing. Note: Fully withdraw the key each time. If done too quickly, the system won’t enter programming mode.
3. Insert the key into the ignition cylinder and turn it to the ACC position.
4. Within 5 seconds, press ANY button on the remote transmitter. Your Hazard Lamps should flash. Note: Only press the button once in this step. Pressing it more than once will disrupt the programming procedure.
5. If there are more transmitters, unlock and lock all doors using the driver’s side power lock/unlock switch within 5 seconds, then press ANY button on the next remote. Repeat this for each transmitter, including existing ones.
6. Turn the key to the OFF position, remove it, then unlock the doors using the driver’s side power lock/unlock and open the driver’s side door.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Nissan Murano