Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Mitsubishi Outlander

Step-by-Step Programming Instructions:

1. Find the Data Port located under the driver’s side dashboard, usually positioned to the right of the steering column.
2. Insert keys into the ignition and leave them in the OFF position.
3. Ensure there are metal contact pins in terminals 1 and 4 of the Data Port, then connect terminals 1 and 4 using a suitable jumper wire. Keep the jumper wire connected throughout the programming process and make sure you identify terminals 1 and 4 correctly.
4. Within 10 seconds of connecting the jumper wire, press the Hazard Switch six times. Note: The doors will automatically lock and unlock once at this point, indicating that the system is in programming mode.
5. Press the LOCK button on the remote to be registered three times within 10 seconds. Upon successful programming, the door will lock and unlock once.
6. Repeat step 5 with up to four remotes (including any existing ones) within one minute. After completing each programming, the doors will lock and unlock once.
7. Disconnect the programming wire and remove the keys from the ignition.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Mitsubishi Outlander