Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Dodge Durango

Step-by-Step Programming Instructions:

Please note: You must have at least one working remote to add another to the system. If you don’t have a working remote currently, these instructions won’t be effective. You’ll need to enlist the help of a locksmith who can use a computer to program the first remote for you.

1. Press the LOCK button five times at two-second intervals to re-synchronize the remote.
2. Insert the key into the ignition switch. Turn the ignition to the RUN position (as far as it can go without cranking the engine). Wait for the ignition chimes to stop.
3. Using the working remote, press and hold the UNLOCK button for 4 to 10 seconds.
4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then press the PANIC button (on the programmed remote) for 1 second and release both buttons. A chime will sound to indicate that the remote programming mode has been entered (allow 3 seconds for the chime to sound).
5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons simultaneously, then press and release just the UNLOCK button on the same remote. A chime will sound indicating the remote has been programmed. Press and release the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on each new remote you wish to program at this time. Locks will cycle after each additional remote is programmed.
6. Turn the ignition OFF and remove the key.
7. Test the remotes.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Dodge Durango