Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Chevrolet Monte Carlo

Step-by-Step Programming Instructions:

1. Start by turning the ignition to ACC or ON and ensure the radio is turned off. Do not attempt to crank the engine.
2. Hold down the DISP button on the radio for at least five seconds until “settings” appears on the display.
3. Use the SEEK up or down arrows until “FOB PROG” is displayed.
4. Press the PREV or NEXT button to enter the submenu. The currently selected option will be marked with an asterisk. “BEGIN” will be displayed.
5. Press the DISP button to begin programming. When the message “PUSH FOB” flashes, simultaneously press and hold the LOCK and UNLOCK buttons on the first transmitter for 15 seconds. A chime will confirm successful transmitter learning.
6. Repeat Step 5 for each additional transmitter, up to a maximum of four remotes per vehicle. There’s no need to press the DISP button again; just press the LOCK and UNLOCK buttons on the next transmitter to be learned. The selected mode is now set. You can either exit the programming mode following the instructions later in this section or proceed to program the next available feature on your vehicle.

Exiting Feature Customization Mode:
This feature enables you to exit the vehicle customization programming. To exit:
1. Scroll until “EXIT” appears on the display.
2. Press the DISP button to exit programming. A chime will confirm the exit.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Chevrolet Monte Carlo