Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Acura RL

Step-by-Step Programming Instructions:

Before beginning programming, ensure that all remotes (up to 3) to be programmed or reprogrammed are present. The following steps 1-12 are performed on a single remote, while step 13 is executed on all remotes to be programmed (up to 3 can be programmed).

1. Sit in the car, close all doors, and ensure they are unlocked.
2. Turn on the ignition (do not start the car, only the ignition).
3. Press the lock button on the remote.
4. Turn the key to the accessory ON position (your radio works in this mode).
5. Turn on the ignition (do not start the car, only the ignition).
6. Press the lock button on the remote.
7. Turn the key to the accessory ON position (your radio works in this mode).
8. Turn on the ignition (do not start the car, only the ignition).
9. Press the lock button on the remote.
10. Turn the key to the accessory ON position (your radio works in this mode).
11. Turn on the ignition (do not start the car, only the ignition).
12. Press the lock button on the remote; the locks should chirp to indicate that programming mode was entered successfully.
13. Press the LOCK button on each of the remaining remotes to be programmed (one at a time).
14. Turn off the car carefully and try locking/unlocking with each remote.

Optional Step for enabling/disabling chirping when locking/unlocking with remote:

1. Press the trunk release button on the remote and hold it.
2. While holding, press the LOCK button on the remote and hold it; the LED on the remote will flicker for about 1 second.
3. After the LED goes off, release both buttons and test it.
4. The procedure for chirp on and chirp off is the same. This needs to be done on all remotes; otherwise, only the one programmed will allow chirping while the others will remain silent, or vice versa.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Acura RL