Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2002 Dodge Ram 1500

Step-by-Step Programming Instructions:

NOTE: You MUST HAVE at least one working remote to add one more to the system. If you don’t have a working remote right now, these instructions will not work. You will need to have a locksmith use a computer to program the first remote for you.
1. Enter your vehicle and close all doors.
2. Fasten your seatbelt (fastening the seatbelt will cancel any chime that may confuse you during this programming procedure).
3. Place the key into the ignition.
4. Turn the ignition to the ON position (DO NOT START THE ENGINE).
5. Press and hold the UNLOCK button on a working remote.
6. Continue to hold the UNLOCK button, wait at least 4 seconds but no longer than 10 seconds, then press and hold the PANIC button.
7. When a single chime is heard, release both buttons. The chime indicates the system is in program mode.
8. Press and release both the LOCK and UNLOCK buttons simultaneously on the remote to be programmed.
9. A single chime will be heard. The chime indicates the remote was recognized.
10. Within 4 seconds of hearing the chime, press and release any button on the remote being programmed.
11. A single chime will be heard. The chime indicates the remote has been programmed.
12. Repeat steps 8 to 11 for a total of 4 remotes.
13. Turn the ignition to the OFF position or wait 60 seconds to exit program mode.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2002 Dodge Ram 1500