404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2001 Toyota Prado Ignition Smart Key Fob - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2001 Toyota Prado Ignition Smart Key Fob

0
33

Compare
SKU: Remote Toyota Prado 2001 Categories: , , , Tags: , , ,

Description

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2001 Toyota Prado

Step-by-Step Programming Instructions:

If you have a functioning transmitter:

1. Ensure the door is open.
2. Remove the key from the ignition.
3. Lock the doors using the transmitter.
4. Unlock the doors using the transmitter.
5. Within 20 seconds of unlocking, insert the key into the ignition cylinder and turn it from the “ACC” position to the “ON” position 20 times, leaving the key in the “OFF” position after the 20th turn. The vehicle’s indicators will flash 20 times to indicate successful entry.
6. On the 20th flash of the indicators, press the button once on each transmitter.
7. Once finished, turn the ignition key to the “ON” position to lock in and exit from the programming mode.

If you have no functioning transmitters:
1. Ensure the vehicle audio PIN number is known or the audio PIN security system is deactivated prior to battery disconnection.
2. Ensure the door is open.
3. Disconnect the negative battery cable, wait a minimum of 5 minutes, then reconnect.
4. Within 20 seconds of reconnecting the battery cable, insert the key in the ignition, then cycle the ignition key from the “ACC” position to the “ON” position 20 times, leaving the key in the “OFF” position after the 20th turn. The vehicle’s indicators will flash 20 times to indicate successful entry.
5. If the indicators fail to flash, wait 5 seconds, then quickly turn the ignition switch from the “ACC” position to the “ON” position 10 times, leaving the key in the “OFF” position after the 10th turn. Wait 15 seconds, then recycle the ignition switch 20 times. The vehicle’s indicators will flash 20 times to indicate successful entry.
6. On the 20th flash of the indicators, press the button once on each transmitter.
7. Turn the ignition key to the “ON” position to lock in and exit from the programming mode.

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2001 Toyota Prado

Leave a reply

X
X