404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2001 Honda Odyssey Keyless Entry Remote Key Fob - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2001 Honda Odyssey Keyless Entry Remote Key Fob

0
24

Compare
SKU: Remote Honda Odyssey 2001 Categories: , , , Tags: , , ,

Description

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2001 Honda Odyssey

Step-by-Step Programming Instructions:

Note: This system can store up to three remotes. The remotes are stored in a stacking-type memory. If a fourth remote is programmed, the first remote will be erased.

1. Turn the ignition switch to ON (II).
2. Within 4 seconds, press the LOCK or UNLOCK button on one of the remotes. Make sure the remote is aimed at the receiver near the glovebox.
3. Within 4 seconds, turn the ignition switch to LOCK (0).
4. Repeat steps 1, 2, and 3 two more times using the same keyless remote used in step 2.
5. Within 4 seconds, turn the ignition switch to ON (II).
6. Within 4 seconds, press the LOCK or UNLOCK button on the same remote. Make sure the power door locks cycle to confirm you are in programming mode. Press the LOCK or UNLOCK button again.
7. Press the LOCK or UNLOCK button on each remote you want to program. Make sure the door locks cycle after you push each remote button to confirm the system has accepted the remote.
8. Turn the ignition switch to LOCK (0) to exit programming mode.
9. Test remote(s).

Programming Instructions for the 2001 LX Model with Dealer-Installed Keyless Entry System:

1. Turn the ignition switch to ON (II).
2. Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
3. Turn the ignition switch to LOCK (0).
4. Repeat steps 1, 2, and 3 two more times using the same keyless remote used in step 2.
5. Turn the ignition switch to ON (II).
6. Press the LOCK or UNLOCK button on the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
7. Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm the system has accepted the remote.
8. Turn the ignition switch to LOCK (0) to exit programming mode.
9. Test remote(s).

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2001 Honda Odyssey

Leave a reply

X
X