Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Toyota Camry Solara

Step-by-Step Programming Instructions:

1. Begin with the key out of the ignition, the driver’s door open, all other doors closed, and the driver’s door unlocked.
2. Insert the key into the ignition (do not turn) and then pull it out.
3. Perform these steps within 40 seconds:
A. Use the power door lock switch on the driver’s door to perform 5 lock/unlock cycles, starting with lock. Maintain an even pace, aiming for about one cycle per second. (1 cycle = 1 lock and 1 unlock.)
B. Close and then open the driver’s door.
4. Perform these steps within 40 seconds:
A. Use the power door lock switch on the driver’s door to perform 5 lock/unlock cycles, starting with lock. Maintain an even pace, aiming for about one cycle per second. (1 cycle = 1 lock and 1 unlock.)
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (do not start) and then back to OFF.
D. Turn the ignition to ON (do not start) and then back to OFF.
E. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should cycle automatically, indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds:
A. Press the lock and unlock buttons on the remote simultaneously for 1 second.
B. Immediately after releasing the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle once, indicating successful programming. If the door locks don’t cycle or cycle twice, repeat steps A and B; your remote has not been accepted.
C. Repeat steps A and B in step 6 for each new transmitter.
7. Close the driver’s door.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Toyota Camry Solara