How to Program a 2000 Pontiac Grand Am Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Pontiac Grand Am

Step-by-Step Programming Instructions:

1. Close all vehicle doors.
2. Turn the ignition switch to the ON position, then to the OFF position.
3. Remove the key from the ignition.
4. Press and hold the driver’s side door lock switch in the UNLOCK position until step 8.
5. Insert the ignition key into the ignition lock cylinder and remove it. (Do not turn the ignition key.)
6. Insert the ignition key into the ignition lock cylinder and remove it. (Do not turn the ignition key.)
7. Insert the ignition key into the ignition lock cylinder. (Do not turn the ignition key.) Leave the key in the ignition cylinder.
8. Release the door lock switch. The vehicle will sound three beeps to verify that the Program Mode has been activated.
9. Press and hold the LOCK and UNLOCK buttons together on the keyless remote until the vehicle beeps twice to verify that the keyless remote has been successfully programmed. This may take approximately 15 seconds.
10. Repeat the previous step (9) to program up to four keyless remotes, including any old ones.
11. Remove the ignition key to exit Program Mode.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Pontiac Grand Am