Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Pontiac Firebird

Step-by-Step Programming Instructions:

1. Start by switching the ignition to the ON position, then to the OFF position.
2. Remove the fuse labeled RADIOfuse.
3. Turn the ignition switch from OFF to RUN position (without starting the engine) three times within five seconds, ending in the RUN position. The vehicle will confirm entry into programming mode by locking and then unlocking the door locks.
4. Press and hold both the LOCK and UNLOCK buttons on the first transmitter for approximately 15 seconds. The vehicle will confirm programming by locking and then unlocking the door locks. Your new remote has been accepted, and all existing remote codes have been erased.
5. Repeat the previous step for each additional transmitter (including any existing transmitters). You can program up to 4 transmitters. Remember to complete this before reinstalling the RADIOfuse.
6. Place the ignition switch in the OFF position. Note: The remote keyless entry system will not be operational if the radio fuse is open.
7. Replace the RADIOfuse. If you need to restart the procedure at any time, turn the ignition OFF and begin again with step number 1.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Pontiac Firebird