How to Program a 2000 Oldsmobile Silhouette Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Oldsmobile Silhouette

Step-by-Step Programming Instructions:

1. Remove the key from the ignition.
2. Locate and remove the “BCMPRGRM” fuse from the fuse panel. This panel can be accessed by opening the front passenger door. Use the legend on the fuse panel to properly identify the “BCMPRGRM” fuse.
3. Close all doors.
4. Close the liftgate.
5. Insert keys into the ignition and turn the ignition lock cylinder to ACC (one click towards you, in the opposite direction from starting the engine).
6. Turn the ignition lock cylinder to OFF, and then back to ACC within 1 second.
7. Open and close any vehicle door. A chime will be heard indicating that the system has entered programming mode.
8. Press and hold the transmitter’s LOCK and UNLOCK buttons simultaneously for 14 seconds. Note: After 7 seconds, a chime may confirm successful synchronization. Wait approximately 14 seconds for a second chime confirming successful programming. Your new remote has been accepted, and all existing remote codes have been erased.
9. Repeat the previous step for each additional transmitter to be programmed, including any existing transmitters.
10. Remove the ignition key from the ignition lock cylinder.
11. Reinstall the “BCMPRGRM” fuse into the fuse panel.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Oldsmobile Silhouette