How to Program a 2000 Oldsmobile Intrigue Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Oldsmobile Intrigue

Step-by-Step Programming Instructions:

1. Close all vehicle doors.
2. Turn off the ignition.
3. Remove the key from the ignition.
4. Press and hold the driver’s side door lock switch in the UNLOCK position.
5. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.)
6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.)
7. Insert the ignition key into the ignition lock cylinder. (Do not turn the ignition key in the lock cylinder.) Leave the ignition key in the ignition lock cylinder.
8. Release the door lock switch. The vehicle will sound three beeps to verify that the Program Mode has been activated.
9. Press the LOCK and UNLOCK buttons together on the keyless entry transmitter and hold until the vehicle beeps twice to verify that the transmitter has been successfully programmed (this takes approximately 15 seconds).
10. Repeat the previous step to program up to four transmitters (including your old ones).
11. Remove the ignition key in order to exit the Program Mode.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Oldsmobile Intrigue