How to Program a 2000 Nissan Maxima Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Nissan Maxima

Step-by-Step Programming Instructions:

IMPORTANT: Before entering programming mode, ensure you have all the transmitters you will use with the vehicle. Programming a transmitter will erase all previous codes from memory. Other transmitters will not function until you program them again.

1. Close and lock all doors using the driver’s side power lock/unlock switch.
2. Insert the key into the ignition and remove it from the ignition key cylinder at least six times within 10 seconds. If done successfully, your Hazard Lamps will flash (Fully withdraw the key from the ignition cylinder each time). If this step is performed too quickly, the system will not enter programming mode.
3. Insert the key into the ignition cylinder and turn it to the ACC position.
4. Within 5 seconds, press the LOCK button on the keyless remote. Your Hazard Lamps should flash. (Do not press the button more than once in this step). Pressing the button more than once will not successfully complete the programming procedure.
5. If there are any remaining remotes (including old ones), unlock and then lock all doors using the driver’s side power lock/unlock switch. Within 5 seconds, press the LOCK button on the next remote. Your Hazard Lamps should flash. Repeat this step for each keyless remote (including any existing ones).
6. Turn the key to the OFF position, remove the keys from the ignition, open the door, and test the remotes.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Nissan Maxima