How to Program a 2000 GMC Sierra Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 GMC Sierra

Step-by-Step Programming Instructions:

1. Begin by closing all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel. Continue to hold until instructed to release in step 9.
4. Perform steps 5 through 8 in rapid succession.
5. Turn the ignition switch to the ON position (as far as it goes without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position to exit the transmitter programming mode.
13. Remove the key and test the remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 GMC Sierra