Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Chrysler Sebring

Step-by-Step Programming Instructions:

Note: Adding a new key requires having two valid keys. If you don’t have two working keys, you’ll need a locksmith to program one for you. Here’s how to proceed:

1. Begin by inserting the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key.

2. Next, insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound, and the Vehicle Security Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key.

3. Now, insert the new key into the ignition switch. Turn the ignition switch to the ON/RUN position within 60 seconds. After 10 seconds, a single chime will sound, and the Vehicle Security Light will stop flashing. To confirm that programming is complete, the Vehicle Security Light will briefly turn on again before turning off. Your new key is now programmed. Repeat this procedure to program up to eight keys.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2000 Chrysler Sebring