How to Program a 1999 Chrysler LHS Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1999 Chrysler LHS

Step-by-Step Programming Instructions:

IMPORTANT: You MUST HAVE one working remote to add one more to the system. If you do not have one working remote right now, then these instructions will not work. You will have to have a locksmith or dealership use a computer to program the first remote for you.

1. Turn the ignition to the run position (as far as you can go without starting the engine).

2. Using any working remote, press the UNLOCK button for 4 to 10 seconds.

3. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and press the PANIC button for 1 second, and release both buttons at the same time. A chime will sound within 3 seconds to indicate that the vehicle has entered remote programming mode.

4. Within 30 seconds of the chime, press any button on all remotes to be programmed, including previously programmed remotes. A chime will sound after each remote is programmed.

5. Turn the ignition to OFF and remove the key.

6. Test all remotes.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1999 Chrysler LHS