Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Pontiac Trans Sport

Step-by-Step Programming Instructions:

These programming procedures are specifically designed for USA-built vehicles. Can I program a new key myself if I don’t have any working keys? Yes, after having the new key cut by a locksmith, follow these steps:

1. Insert the new key into the ignition cylinder and turn it to the ON position (as far as you can go without cranking the engine). The security light on the dashboard will illuminate and remain on for ten minutes. When the security light goes out, you have one minute to proceed to the next step.
2. Turn the ignition cylinder to OFF and then back to the ON position. The security light on the dashboard will illuminate and remain on for another ten minutes. When the security light goes out, you have one minute to proceed to the next step.
3. Turn the ignition cylinder to OFF and then back to the ON position. The security light on the dashboard will illuminate and remain on for another ten minutes.
4. After the security light has turned off for the third time, turn the key off and remove it from the ignition. The key is now programmed, and all other keys have been erased.
5. Insert the key and start the vehicle to test it.

Can I program a duplicate key for this vehicle? Yes, after having the new key cut by a locksmith, follow these instructions:

1. Insert an existing programmed working key into the ignition cylinder.
2. Turn the ignition to the ON position and then back to OFF.
3. Remove the existing key, and within 10 seconds, insert the new key and turn it to the ON position.
4. The security light will light up for 2 seconds to indicate successful programming of the additional key. Remove the key from the ignition.
5. Insert the key and start the vehicle to test it.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Pontiac Trans Sport