Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Honda Odyssey

Step-by-Step Programming Instructions:

1. Begin by opening the driver’s door.
2. Press and hold the driver’s power door lock switch in the unlock position. Continue holding the switch throughout the procedure.
3. Insert the key into the ignition, then remove it. Repeat this action four more times within 10 seconds. Ensure steps 3 and 4 are completed within 10 seconds, or the system will exit the programming mode.
4. Insert the key into the ignition. After insertion, verify that the power door locks cycle to confirm the system is in programming mode.
5. Press both the LOCK and UNLOCK buttons on the remote. All power door locks, except the driver’s door, should cycle to confirm acceptance of the remote by the system.
6. To program a second remote, press the LOCK and UNLOCK buttons within 10 seconds of programming the first remote. The system will only accept two remotes.
7. Release the master power door lock switch to exit the programming mode.
8. Test the remotes.

For 1998 EX and LX models with Dealer-installed Keyless Entry System:
Note: Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed remotes will work. You must reprogram all keyless remotes once in the programming mode. Ensure each step is completed within 5 seconds of the previous one to prevent the system from exiting the programming mode.

1. Turn the ignition switch to ON (II).
2. Press the LOCK or UNLOCK button on one of the remotes. An unprogrammed remote can be used for this step.
3. Turn the ignition switch to LOCK (0).
4. Repeat steps 1, 2, and 3 two more times using the same keyless remote used in step 2.
5. Turn the ignition switch to ON (II).
6. Press the LOCK or UNLOCK button on the same remote. Verify that the power door locks cycle to confirm you are in programming mode.
7. Press the LOCK or UNLOCK button on each remote you want to program. Ensure door locks cycle after pushing each remote button to confirm the system has accepted the remote.
8. Turn the ignition switch to LOCK (0) to exit programming mode.
9. Test the remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Honda Odyssey