Description
to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Chevrolet Camaro
Step-by-Step Programming Instructions:
1. Begin by turning the ignition switch to the OFF position.
2. Remove the RADIOfuse.
3. Cycle the ignition switch from OFF to the RUN position (as far as possible without cranking the engine) three times within five seconds, ending in the RUN position. The vehicle will confirm entry into programming mode by locking and then unlocking the door locks.
4. Press and hold both the LOCK and UNLOCK buttons on the first transmitter for approximately 15 seconds. The vehicle will confirm programming by locking and then unlocking the door locks. Your new remote has been accepted, and all existing remote codes have been erased.
5. Repeat the previous step for each additional transmitter (including any existing transmitters). You can program up to four transmitters. This must be done before reinstalling the RADIOfuse.
6. Place the ignition switch in the OFF position.
IMPORTANT: The remote keyless entry system will not be operational if the radio fuse is open.
7. Reinstall the RADIOfuse. If at any time it is necessary to restart the procedure, turn the ignition OFF and proceed again with step number 1.
to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Chevrolet Camaro