Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1997 Oldsmobile Achieva

Step-by-Step Programming Instructions:

1. Ensure the ignition is turned off.
2. Locate the programming connector in the trunk (on the driver’s side). It is a plastic connector with two wires leading to it. The connector is not plugged into anything. You may need to pull back trunk trim to access the connector.
3. The programming connector should have two terminals. Connect both terminals with a suitable jumper wire. Ensure the terminals remain connected throughout the programming procedure.
4. Press the LOCK and UNLOCK buttons on the remote simultaneously. In response, the keyless entry module will cycle all door lock motors at once. This will indicate that your remote has been accepted and all existing remotes have been erased.
5. Repeat step 4 for each additional remote, including any existing remotes. DO NOT remove the jumper wire between programming of remotes.
6. Remove the jumper wire and test the remotes.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1997 Oldsmobile Achieva