Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1997 Mitsubishi Eclipse

Step-by-Step Programming Instructions:

1. Find the Data Port.
2. Insert keys into the ignition and leave them in the OFF position.
3. Ensure there are metal contact pins in terminals 1 and 4 and connect the Data Port with a suitable jumper wire; keep the jumper wire connected throughout the programming procedure. Make sure you know which terminals are 1 and 4.
4. Within 10 seconds after connecting the jumper wire, turn the ignition switch to the ACC position and then back to OFF. Note: The doors will automatically lock and unlock once at this time, indicating that the system is in the programming mode.
5. Press the LOCK button on the transmitter to be registered three times within 10 seconds. Upon successful programming, the door will lock and unlock once.
6. If there are two remotes, register the first, then register the second. Repeat step 5 within one minute to program the second remote. After completing the second programming, the doors will lock and unlock once.
7. Disconnect the programming wire and remove the keys from the ignition.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1997 Mitsubishi Eclipse