Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1997 Chevrolet Malibu

Step-by-Step Programming Instructions:

1. Ensure the ignition is in the OFF position.
2. Locate the Programming Connector in the trunk (center of rear shelf). It appears as a plastic connector with two wires leading to it. The connector should not be plugged into anything. You may need to pull back trim to access it.
3. The programming connector should have two terminals. Connect both terminals with a suitable jumper wire. The Keyless Entry Module will lock then unlock all the door lock motors once. Ensure the terminals remain connected throughout the programming procedure.
4. Press and hold the LOCK and UNLOCK buttons on the transmitter simultaneously for at least 15 seconds or until the vehicle automatically locks and unlocks the door locks. Your new remote has been accepted and all existing remote codes have been erased.
5. Repeat the previous step for each transmitter to be programmed. Do not remove the jumper wire in between programming of transmitters.
6. Remove the jumper wire from the Keyless Programming Connector.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1997 Chevrolet Malibu