Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1997 Chevrolet Cavalier

Step-by-Step Programming Instructions:

1. Ensure the ignition is in the OFF position.
2. Locate the Programming Connector in the trunk (on the driver’s side). It appears as a plastic connector with two wires leading up to it. The connector is not plugged into anything. You may need to pull back trim to access it.
3. The programming connector should feature two terminals. Connect both terminals with a suitable jumper wire. Ensure the terminals stay connected throughout the programming procedure.
4. Simultaneously press the LOCK and UNLOCK buttons on the transmitter. In response, the Keyless Entry Module will cycle all the Door Lock Motors at once. Your new remote has been accepted, and all existing remote codes have been erased.
5. Repeat the previous step for each additional transmitter (including any existing transmitters). Do not remove the jumper wire between programming of transmitters.
6. Remove the jumper wire from the Keyless Programming Connector.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1997 Chevrolet Cavalier