Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Oldsmobile LSS

Step-by-Step Programming Instructions:

1. Insert the key into the ignition and leave it in the OFF position.
2. Locate the Data Link Port under the dashboard on the driver’s side. Identify pins 8 and 4 (Note: the port is wider at the top). Your OBDII port won’t have numbers, refer to a diagram for guidance.
3. Ensure there are metal contact pins in terminals 8 and 4. Connect terminal 8 to terminal 4 using a suitable jumper wire (keep the jumper wire connected throughout the programming procedure). Make sure you identify terminals 8 and 4. The vehicle will respond by locking and unlocking the doors to signify entering programming mode.
4. Close all doors.
5. Turn the ignition to the ON position (as far as possible without cranking the engine). The doors will lock.
6. Press and hold both the lock and unlock buttons together on the first remote to be programmed. After about 15 seconds, the vehicle will respond by locking and unlocking the doors. Release the buttons on the remote.
7. Within one minute, repeat the previous step for the remaining remotes to be programmed.
8. Remove the jumper wire from the OBDII Port.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Oldsmobile LSS