How to Program a 1996 Chevrolet Monte Carlo Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Chevrolet Monte Carlo

Step-by-Step Programming Instructions:

Note: Existing keyless remotes will be erased with this process. Existing working remotes will also need to be reprogrammed.

1. Find the programming connector wire located in the RH trunk area. You may need to pull back the right side trunk trim on the trunk wall to locate the single black/white wire.
2. The programming connector wire should have one terminal in the plastic connector on the end of the black/white wire. Ground the terminal in the connector to a nearby bolt or trunk latch. Keep the connector wire connected to ground throughout the procedure.
3. The system will now automatically lock and unlock doors to indicate that programming mode has been activated.
4. Press any button on the keyless remote. The system will respond by locking and unlocking doors once to indicate successful programming.
5. Repeat step 4 to program any additional keyless remotes, including existing ones. Do not remove the ground wire between programming of keyless remotes.
6. Disconnect the programming connector wire from ground to exit programming mode.
7. Test the keyless remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Chevrolet Monte Carlo