Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Chevrolet Camaro

Step-by-Step Programming Instructions:

1. Turn the ignition switch to the OFF position.
2. Remove the fuse labeled “RADIO.”
3. Cycle the ignition switch from OFF to RUN (as far as possible without starting the engine) three times within five seconds, ending in the RUN position. The vehicle will enter programming mode and confirm by locking and then unlocking the door locks.
4. Press and hold both the LOCK and UNLOCK buttons on the first transmitter for approximately 15 seconds. The vehicle will confirm programming by locking and then unlocking the door locks. Your new remote has been successfully accepted, and all existing remote codes have been erased.
5. Repeat the previous step for each additional transmitter, including any existing ones. You can program up to four transmitters. This must be completed before reinstalling the RADIO fuse.
6. Place the ignition switch in the OFF position. Note: The remote keyless entry system will not work if the radio fuse is open.
7. Reinstall the RADIO fuse. If necessary to restart the procedure at any time, turn the ignition OFF and begin again with step number 1.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Chevrolet Camaro