How to Program a 1996 Buick Riviera Ignition Smart Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Buick Riviera

Step-by-Step Programming Instructions:

1. Insert keys into the ignition and leave them in the OFF position.
2. Locate the OBDII Port. (Note: the port is wider at the top). Your OBDII port won’t have numbers, but use them for reference.
3. Ensure there are metal contact pins in terminals 8 and 4. Connect terminals 8 and 4 with a suitable jumper wire (keep the jumper wire connected throughout the programming procedure). Make sure you know which terminals are 8 and 4. The vehicle will respond by locking then unlocking the doors to signify entering programming mode.
4. Turn the ignition to the ON position (as far as possible without cranking the engine).
5. Press and hold both the LOCK and UNLOCK buttons together on the first transmitter to be programmed. Up to about 30 seconds, the vehicle will respond by locking then unlocking the doors. Release the buttons on the transmitter.
6. Within one minute, repeat the previous step on the remaining transmitter (if any, including any existing remotes).
7. Remove the jumper wire applied to the OBDII Port.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Buick Riviera