Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1995 Dodge Intrepid

Step-by-Step Programming Instructions:

Method 1:
1. Locate the data link connector under the steering column.
2. Turn the ignition on.
3. Ground pin 1, which is the upper leftmost pin, as this is the programming line. The door locks will cycle, locking and then unlocking.
4. Press any key on the transmitter. The locks will cycle again to confirm. If you have a second transmitter, press any button on it and wait for the lock to cycle again.
5. Remove the ground from pin 1.
Done! Test it out. By the way, the replacement transmitter battery is a CR2016; you can find it at Radio Shack.

Method 2:
Remove the bezel to the right of the steering wheel that houses an A/C vent and the traction control switch (if present), and unplug or locate the traction control connector.
Place a jumper between pins 1 and 4 to place the receiver into teach mode.
Operate the power door lock button on the door and push the lock/unlock button on the fob.
If you have two fobs, repeat the process for the second one; it will remember both.
Replace the connector and bezel.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1995 Dodge Intrepid