Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1995 Chevrolet Lumina

Step-by-Step Programming Instructions:

1. **Locate the programming connector wire**: This wire is typically found in the RH (right-hand) trunk area. You might need to pull back the right side trunk trim on the trunk wall to find it. Look for a single black/white wire.

2. **Identify the terminal**: The programming connector wire should have one terminal in the plastic connector on the end of the black/white wire. Ground this terminal to a nearby bolt or trunk latch. Keep the connector wire connected to ground throughout the procedure.

3. **Activate programming mode**: Once the wire is grounded, the system will automatically lock and unlock the doors to indicate that programming mode has been activated.

4. **Program the remote**: Press any button on the keyless remote. The system will respond by locking and unlocking the doors once to indicate successful programming.

5. **Program additional remotes**: Repeat step 4 for each additional keyless remote you want to program, including existing ones. Do not remove the ground wire between programming each remote.

6. **Exit programming mode**: Once all remotes are programmed, disconnect the programming connector wire from ground to exit programming mode.

7. **Test the remotes**: Make sure all keyless remotes are working properly by testing them.

Make sure to follow each step carefully to ensure successful programming of the keyless remotes.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1995 Chevrolet Lumina