Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1995 Chevrolet Blazer

Step-by-Step Programming Instructions:

1. Locate the red two-wired programming connector positioned near the central locking control module, found behind the LH lower instrument panel. Remove the panel to access the red programming connector, which should not be connected to anything.

2. Within the red programming connector, identify two pins. Connect these pins by bridging them with a section of wire.

3. The system should respond by locking and unlocking the doors, signaling that the vehicle has entered programming mode.

4. Press any button on the keyless remote once. The system should then lock and unlock the doors, confirming that the keyless remote has been successfully programmed.

5. Repeat step 4 to program additional remotes if needed.

6. Remove the jumper wire from the programming connector to exit programming mode.

7. Test the remote(s) to ensure proper functionality.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1995 Chevrolet Blazer