Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1994 GMC Sonoma

Step-by-Step Programming Instructions:

1. Locate the Data Link Connector (DLC) underneath the driver’s side dashboard. Refer to the provided figure as a guide for your DLC (Note: DLC slots are not lettered on your vehicle). The view should be straight into the cavities of the DLC.

2. Use a fused jumper wire to connect cavity G with a ground. Your vehicle should respond by locking and unlocking the door locks within 2 seconds.

3. Press any button on the first remote to be programmed. The locks will lock and unlock, verifying that the remote was programmed.

4. If applicable, press any button on the second remote to be programmed. The locks will lock and unlock again to verify that the remote was programmed.

5. Remove the jumper wire and test the remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1994 GMC Sonoma