How to Program a 1992 Buick Regal Ignition Smart Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1992 Buick Regal

Step-by-Step Programming Instructions:

Note: This procedure will erase existing keyless remotes. Existing working remotes will need to be reprogrammed as well.

1. Find the programming connector wire in the RH trunk area. You may need to pull back the right side trunk trim on the trunk wall to locate the single black/white wire.
2. The programming connector wire should have one terminal in the plastic connector on the end of the black/white wire. Ground the terminal in the connector to a nearby bolt or trunk latch. Leave the connector wire connected to ground throughout the procedure.
3. The system will now lock and unlock doors automatically to indicate that programming mode has been activated.
4. Press any button on the keyless remote. The system will respond by locking and unlocking doors one time to indicate successful programming.
5. Repeat step 4 to program any additional keyless remotes, including existing ones. Do not remove the ground wire between programming of keyless remotes.
6. Disconnect the programming connector wire from ground to exit programming mode.
7. Test the keyless remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1992 Buick Regal